Yard Machines Y60 Operations Instructions download pdf (Page 188)

e.

Install rocker arm assembly and make

certain that push rods engage with rock-

er arms.

Torque bolts to specifications

shown in Table 5.

f. Perform a valve clearance adjustment

as outlined in Section IV.

g. Install rocker arm cover, using a

new gasket and torque rocker arm cover

retainers to specifications. Do not over

tighten.

5-36. WATER PUMP REMOVAL

a. Proir to removing water pump, drain

colling system completely, remove colling

fan from water pump pulley and disengage

V-belts from water pump pulley.

b. Loosen and remove all bolts (except

captive bolt shown by arrow in figure 5-30)

which secure water pump to cylinder block.

c. Captive bolt may be loosened for water

pump removal, but cannot be removed from

pump unless pulley is removed.

d. Carefully tap on the pump body (not

pulley) until gasket seal is broked and

pump can be removed.

5-37. DISASSEMBLY. (Refer to figure 5-32)

a. With the fan blade and pulley removed,

use a bar type puller to remove the pulley

hub. Discard the hub. It is dangerous to

re-use a hub that has been removed since it

won't fit properly.

1. Pump assembly

6. Gasket

2. Capscrew

7.

Repair kit

3.

Pulley

8.

Plug

4.

Cover

9.

Fitting

5. Screw

10. Washer

11.

Body

Figure 5-32 Water Pump Assembly

5-26

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 629 630

Comments to this Manuals

No comments