Yard Machines 663 Operator's Manual download pdf (Page 15)

attempting to relieve pressure and remove the radi-

ator cap. Failure to heed this warning could result

in severe burns.

Â DO NOT attempt to loosen or disconnect any

hydraulic lines, hoses or fittings without first

relieving hydraulic circuit pressure. Also, be care-

ful not to touch any hydraulic components that

have been in recent operation because they can be

extremely hot and can burn you!

Â Avoid lubrication or mechanical adjustments with

the machine in motion or the engine operating. If

the engine must be in operation to make certain

adjustments, place the transmission in neutral,

apply the parking brake, place the equipment in a

safe position, securely block the wheels and use

extreme caution.

Â NEVER allow any riders on this machine or use as

a lift for personnel.

Â To insure continued safe operation, replace dam-

aged or worn-out parts with genuine GEHL service

parts, before using this equipment.

Â When road travel is required, know and use the

signaling devices required on the machine. Provide

an escort when required.

Modifications, Nameplates, Markings

and Capacities

Â Modifications and additions that affect capacity or

safe operation shall NOT be performed without the

manufacturer’s prior written approval. Where such

authorization is granted, tags or decals shall be

changed accordingly.

Â All attachment tools MUST be marked to identify

the attachment tool and the total capacity with

attachment tool at maximum elevation with load

laterally centered.

Â ALWAYS make sure all nameplates, caution and

instruction markings are in place and legible.

Local government regulations may require local

decals, which then become the responsibility of the

local owner to provide.

Â Study the load chart carefully. It shows maximum

capacity to be lifted and placed at specific outward

and upward distances. ALWAYS be aware of load

weights prior to attempting lift and placement with

this machine.

Protective Guards and Warning

Devices

Â This machine is fitted with an overhead guard in

accordance with industry standards. It is intended

to offer protection to the operator from falling

objects, but cannot protect against every possible

impact. Therefore, it should not be considered a

substitute for good judgment and care in operating

the machine.

Â This machine is equipped with a horn and backup

alarm. The user shall determine if operating condi-

tions require the machine to be equipped with

additional devices (mirrors, rotating beacon, etc.)

and be responsible for providing and maintaining

such devices.

Â DO NOT modify the ROPS in any manner.

Unauthorized modifications such as welding,

drilling, cutting or adding components can weaken

the structure and reduce its protective ability. If a

ROPS is subjected to roll-over or other damage it

must be replaced. DO NOT attempt to repair a

ROPS.

PRINTED IN U.S.A. 13 Form No. 907879/AP1198

SAFETY

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Comments to this Manuals

No comments

Yard Machines 663 Operator's Manual Page 15

Comments to this Manuals

Related products and manuals for Lawnmowers Yard Machines 663