Yard-machines 611 User Manual download pdf (Page 7)

Attaching Clutch Grips

(Use Hardware Group B.)

• Slide the pivot rod into the cover tube as shown in

Figure 3.

NOTE: In some models, the pivot rod and cover tube

may be pre-assembled.

Figure 3

• Place the clutch grips in position on the rod as

shown in Figure 4. Thread hex nuts (D) onto each

end of the rod. Tighten nuts allowing the clutch

grips to move freely on the pivot rod. See Figure 4.

Figure 4

• Insert clutch grip and rod assembly into handle

tabs. Clutch grips must sit on top of the handles.

Thread hex nuts (D) on each end to hold into

position. Do not tighten. See Figure 5.

Figure 5

Attaching Handle Panel

(Use Hardware C.)

• Position the handle panel between handles. Insert

two carriage bolts (E) on each side and secure with

lock washers (C) and hex nuts (D). See Figure 6.

Figure 6

Attaching Speed Selector Plate

(Use Hardware D.)

• Assemble the speed selector plate to the outside

of the handles as shown in Figure 6. Secure using

two self-tapping screws (F) on each side.

Attaching Shift Lever

• Insert the shift lever through slot in the speed

selector plate. See Figure 7.

NOTE: The bend in the lever should be towards the

operator.

Figure 7

• Secure shift lever to the shift lever spring using two

hex bolts (G) and hex lock nuts (H). Tighten both

Pivot Rod

Cover Tube

Clutch

Grips

Hex Nuts D

Pivot Rod

with Cover

Clutch Grip and

Rod Assembly

Handle

Tab

Hex Nut D

Carriage

Bolts E

Carriage

Bolts E

Lock

Washer C

Lock

Washer C

Speed

Plate

Selector

Self-Tapping

Screws F

Self-Tapping

Screws F

Hex Lock Nuts H

Hex

Bolt G

Hex

Bolt G

Shift Lever

Spring

Shift

Lever

Speed Selector

Plate

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Yard-machines 611 User Manual Page 7

Comments to this Manuals

Related products and manuals for Cars Yard-machines 611